
AD-4430B - 7 -
3.3.2. Weighing Function
Zero adjustment
Sets the gross weight to zero by pressing the (ZERO) key.
Selection of disable or enable for the operation when unstable.
The zero value is backup by FRAM.
Zero adjustable range : Can be set optionally in the range of 1 to 100% of the
weighing capacity.
Zero tracking
Tracks the weight drift around the zero point to maintain zero.
Zero tracking time : 0.0 to 5.0 seconds Can be set optionally within the range
Zero tracking band : 0.0 to 9.9 d Can be set optionally within the range
Tare
Sets the net weight to zero by pressing the (TARE) key.
The tare weight is backup by FRAM.
Tare range : Gross weight ≤ Weighing capacity
Stability detection
Turns ON the stabilization indicator
when the variables of the weight values per
sampling are within the set band in the set time.
Stability detection time : 0.0 to seconds Can be set optionally within the range
Stability detection band : 0 to 9d Can be set optionally within the range
Digital filter Cutoff frequency (-3 dB) range : 0.7 to 100 Hz
Zero detection Detects to place nothing on the weighing pan.
Comparator Compares the measurement with these limits and outputs the results.
Hold function
Displays the measurement value held.
Select from sample hold, peak hold, average hold.
3.3.3. General
Data backup
Power failure countermeasure
Zero value, tare weight, calibration, function parameters backup by
FRAM. (Approx. 10 years)
Power source DC 24 V, +10%, -15%
Power consumption Approximately 6 W
Operating temperature
Operating humidity
-10 °C to +50 °C,
85 %RH or less (no condensation)
Installation method DIN rail mount
Mass Approximately 180 g
3.3.4. Accessories
Item Quantity Model name
Power source connector 1 FMC1.5/2-ST-3.5
Comentarios a estos manuales