A&D AD-4430B Especificaciones descargar pdf (Pagina 32)

- 30 - AD-4430B

5.4. General Functions

In this section, the way of pre-setting and descriptions for the general functions is described.

General functions are divided into groups according to function and are indicated by the

group name with the function number.

NOTE: General functions determine the module performance and all of the settings are

stored in the FRAM.

5.4.1. The Procedure To Store New Parameters

Step 1 Press the + key to enter to the function mode and display .

Press the key to start the function mode.

If returning to the weighing mode, press the key.

Step 2 Press the key to select the function group to be set.

Press the key. The function group is as follows :

Display Group Name

Basic functions

Hold functions

BCD Interface

Step 3 Press the key to select the function number to be set.

Press the key. The current setting value is displayed.

Step 4 When changing data, two methods of parameter selection and digital input depending on

the function are available.

Type Description of method to change data

Parameter

selection

Only the available parameter is displayed and blinks.

Select a number using the key.

Digital input

All the digits are displayed and a digit to be changed blinks.

Select a digit using the key and

change the value using the key.

After changing data, press the key. The next function number is displayed.

When the value is not to be changed, press the key to return to the function

number display.

Step 5 Press the key to return to Step 2 .

Press the key once to store new data in FRAM and to return to the weighing

mode.

The blinking decimal point means that the current value is not the weight value.

If a data exceeding the available range is inputted, is displayed and data is

canceled.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Sin comentarios

A&D AD-4430B Especificaciones Pagina 32