A&D GH Series Manual de instrucciones descargar pdf (Pagina 36)

A&D GR Series Instruction Manual

GB 36

Class Item Parameter Summaries

dout Cond • 0 No output Refer to “Section 11

Data output Condition 1 Output Data Memory Function”.

PUSE • 0 No pause Selection of output interval.

Data Pause 1 Pause (1.5 second)

At-F • 0 Not used Selection of paper feed after

Auto-feed 1 Use printing

inFo • 0 No output

GLP output 1 AD-8121 format The type of GLP data output

2 Data format

Ar-d • 0 Not used

Zero after output 1 Use

SiF 0 600 bps

Serial Interface bPS 1 1200 bps

baud rate • 2 2400 bps

3 4800 bps

4 9600 bps

btPr • 0 7 bits, even parity check

Length, parity bit 1 7 bits, odd parity check

2 8 bits, no parity check

CrLF • 0 CR LF CR: ASCII code 0Dh

Terminator 1 CR LF: ASCII code 0Ah

tyPE • 0 A&D standard format

Data format 1 DP format Refer to section “Explanation

2 KF format of data format”.

3 MT format

4 NU format

t-UP 0 No limit Waiting time during a command

Receive time • 1 For one second

ErCd • 0 No output AK: ASCII code 06h

<AK> and error code 1 Output

CtS • 0 Not used

CTS control 1 Using CTS and RTS Keeps the RTS line (active) high

while the computer receives data

CTS low will be set if it is busy.

d5 Fnc Ld in • 0 Enter the water temperature

Specific gravity Liquid density 1 Enter the density directly.

measuring mode

Unit

Refer to “Section E Weighing Units”

Unit

CS in

Refer to “Section C Calibrarion”

Correction of internal weigh

Refer to “Section J ID Number and GLP”

ID number

•: factory setting.

Note: When the baud rate is set to 2400 bps or less, the output rate is slower than the display

update rate and the balance may not transmit the data completely (and may transmit intermit-

tently).

Available only when the specific gravity

measuring mode is selected. Refer to section

“13“. Specific gravity (density) measurement.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 70 71

Comentarios a estos manuales

Sin comentarios

A&D GH Series Manual de instrucciones Pagina 36

Comentarios a estos manuales

Relacionado con productos y manuales para De medición, control y control A&D GH Series