A&D GH Series Manual de instrucciones descargar pdf (Pagina 16)

A&D GR Series Instruction Manual

GB 16

Note: This function automatically calibrates the balance, when the balance detects an ambient

temperature change.

When the balance detects a change in ambient temperature, this indicator

blinks and automatic self calibration is required. If the balance is not used for

several minutes with this indicator blinking, the balance performs automatic self

calibration. The environment will affect the time that the indicator blinks.

This display means “the balance is measuring calibration data”. Do not allow

vibration or draughtrs to affect the balance while this indicator is displayed.

You can use the balance while the indicator blinks. But, it is recommended that to maintain the best

accuracy, stop using the balance and confirm that there is nothing on the pan when the indicator starts

blinking. Allow the balance to self-calibrate or initiate the calibration by pressing the [CAL] button.

Note: Do not place anything on the weighing pan during automatic calibration.

Control of Automatic Self Calibration

Automatic self calibration is controlled by a parameter in “Permission or Prohibition”. Refer to

Section “Function Switch and Initialization”.

Automatic Self Calibration

0 : Not used

1 : Used

3.2. Automatic Self Calibration

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 70 71

Sin comentarios

A&D GH Series Manual de instrucciones Pagina 16